Time-interleaved SAR ADC with Signal Independent Background Timing Calibration
Author | : Christopher Kaiti Su |
Publisher | : |
Total Pages | : 0 |
Release | : 2020 |
ISBN-10 | : 9798582546061 |
ISBN-13 | : |
Rating | : 4/5 (61 Downloads) |
Book excerpt: This thesis describes a background-calibration technique that overcomes timing errors in time-interleaved analog-to-digital converters (ADCs) in a way that is almost independent of the user-provided ADC input signal. Additive dither is widely used to achieve signal-independent background calibration of many errors in data converters [1]. For example, this technique has been used to calibrate for gain mismatch in time-interleaved ADCs [2]. In most cases, however, binary dither has been used, and binary dither is not able to detect timing errors when the user-provided ADC input is zero or constant because timing errors do not produce amplitude errors when the ADC input is constant. This thesis presents a study of the use of a random ramp-based dither signal to calibrate for timing errors in time-interleaved ADCs. To demonstrate the dither-based timing calibration, a prototype 10-bit 500-MS/s 4-channel ADC was fabricated in 40-nm CMOS. With the proposed timing calibration, the Signal-to-Noise-and-Distortion Ratio (SNDR) is 50.1 dB with a user-provided input at 249 MHz while consuming 6.2 mW, giving a figure of merit (FoM) of 48.4 fJ/step. Disabling the ramp after the timing calibration converges improves the SNDR to 51 dB and reduces the power dissipation to 5.8 mW as well as the FoM to 39.8 fJ/step. [1] H. E. Hilton, "A 10-MHz Analog-to-Digital Converter with 110-dB Linearity," Hewlett-Packard Journal, vol. 44, No. 5, pp. 105-112, Oct. 1993. [2] D. Fu, K. C. Dyer, P. J. Hurst, and S. H. Lewis, "A Digital Background Calibration Technique for Time-Interleaved Analog-to-Digital Converters," IEEE J. of Solid-State Circuits, vol. 33, No. 12, pp.1904-1911, Dec. 1998.